Cisco TelePresence MCU MSE 8510 Erste Schritte - Seite 11

Blättern Sie online oder laden Sie pdf Erste Schritte für Netzwerk-Hardware Cisco TelePresence MCU MSE 8510 herunter. Cisco TelePresence MCU MSE 8510 16 Seiten. Getting started

Seite drucken

Using the MCU MSE 8510

Creating conferences

To create a conference:

In the web interface of the MCU MSE 8510, go to

new conference

Type a

Name

Type an optional numeric identifier, for example

telephone number that participants can use to join the conference when calling

in to the MCU MSE 8510 via a gatekeeper or SIP registrar.

There are two types of conference participant: chairperson and guest.

IDs and PINs allow participants to connect to conferences as the correct

participant type. Chairperson participants use the Numeric ID and

optionally, the PIN; guest participants use the Guest numeric ID and

optionally, the Guest PIN. For more information, refer to the online help.

If you are using a gatekeeper, select

registrar, select

Ensure the

Maximum duration

hour).

All other values can be left at their default settings. Refer to the online help for

further information about the available settings.

Note that if you do not configure the conference to start immediately, it

will become a scheduled conference and will be inactive until its start

time.

Scroll down and click

The conference you have created is now active (if you used the default immediate

start time) and participants can join in one of two ways: either the MCU MSE 8510

can call out to specified endpoints or endpoints can dial in. Any endpoints that have

been added to a conference, as pre-configured participants, will be called in to the

conference by the MCU MSE 8510 .

for the conference, for example SalesMeeting.

SIP registrar

Add conference

123

H.323 gatekeeper

of the conference is sufficient (the default is one

Using the MCU MSE 8510

and click

Conferences

. This will be the

; if you are using a SIP

Add