[E] PAPER OUT SET STD XXX
There is no paper in the standard paper cassette.
display prompts you to load the correct paper size into the standard paper
cassette.
[E] PAPER SIZE ERROR
The paper size you selected with SelecType (or the default size if
have not selected a size) does not match the paper loaded in the selected
paper cassette.
[S] PRINTING
The printer has received data and is printing.
[S] PRINT STOP X/X
The printer stops printing during a multi-copy print operation.
[S] RAM Check X.X MB
The printer is checking RAM (X.X = capacity).
[S] READY
The printer is ready to print.
[E] REINSERT CARD
If this message appears on the display, you
card or cartridge while the FEED light was still lit or while the printer
was on line.
EPL-7000 cont.
[E] REMOVE CARD
You may have inserted a font card or cartridge while the printer was on line
or while the FEED light was on.
[E] RESELECT TRAY
The optional lower paper cassette is not installed and the INPUT option is
set to OPT or AUTO.
[S] RESET
The printer is being reset to the previous settings in the macro specified
with LOAD MACRO option in SelecType Level 1.
[S] ROM Check
The printer is checking ROM.
[E] SAVE MEMORY OVERFLOW
If this message appears when you are trying to save a macro with the SAVE
MACRO option in SelecType Level 1, the printer does not have enough
memory to save any additional macros
[E] SERVICE REQ.
A controller error has been detected.
[E] SERVICE REQ.
A print engine error has been detected.
XX = 03 Fusing Unit (low temp)
04 Main Drive Motor
05 Ozone Fan motor
06 Polygon Mirror Drive
09 HSync Signal
[E] SET FULL PRINT
This message may appear when you are trying to print graphics or a mix of
text and graphics.
[S] STANDBY MODE
Cxxx
EOOXX
may
Data still remains in the printer's buffer.
The right column of the
have
removed
a
you
font
Seite drucken