Epson PowerLite 470 Installationshandbuch

Blättern Sie online oder laden Sie pdf Installationshandbuch für Software Epson PowerLite 470 herunter. Epson PowerLite 470 4 Seiten. Maintenance
Auch für Epson PowerLite 470: Handbuch zur Schnelleinrichtung (4 seiten), Betriebshandbuch (50 seiten), Konformitätserklärung (4 seiten), Handbuch zur Schnelleinrichtung (4 seiten), Spezifikationen (6 seiten)

Epson PowerLite 470 / 475W / 480 / 485W

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Maintenance