Epson PowerLite 470 설치 핸드북

{카테고리_이름} Epson PowerLite 470에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 470 4 페이지. Maintenance
Epson PowerLite 470에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (4 페이지), 운영 매뉴얼 (50 페이지), 적합성 선언 (4 페이지), 빠른 설정 매뉴얼 (4 페이지), 사양 (6 페이지)

페이지 인쇄

Epson PowerLite 470 / 475W / 480 / 485W

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Maintenance