Epson PowerLite 470 Manual de instalação

Procurar online ou descarregar pdf Manual de instalação para Software Epson PowerLite 470. Epson PowerLite 470 4 páginas. Maintenance
Também para Epson PowerLite 470: Manual de configuração rápida (4 páginas), Manual de operação (50 páginas), Declaração de Conformidade (4 páginas), Manual de configuração rápida (4 páginas), Especificações (6 páginas)

Epson PowerLite 470 / 475W / 480 / 485W

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted on the wall or ceiling.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is mounted on the wall or ceiling, stand to

the side in case the lamp is broken.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

4. Slide off the lamp cover.

INSTALLATION HANDBOOK

Maintenance