Pioneer A-J7 Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer A-J7 herunter. Pioneer A-J7 7 Seiten.

Seite drucken

PANEL FACILITIES

[FRONT PANEL]

STEREO AMPLIFIER 47

VOLUME/BAL ANCE

/\S=

@) POWER switch

On:

When

set to the on position, power is supplied and the unit

becomes operational.

Off: When in the off position, power flow is cut and the unit is turned

off.

When the FD-J7 is connected to other components, it acts as the main

power supply for the system. The FD-J7's remote control unit can be

used to switch power to the system on and off.

@ SOUND CHARACTER

Select your desired tone setting from MILD 1 to 3, FLAT, and HARD

1 to 4.

NOTE:

This control does not operate when DIRECT switch is in the on position.

'@) DIRECT switch/indicator

On (indicator lights):

The input signal does not pass through sound adjusting circuitry such

as sound character or balance, so it is more faithfully reproduced.

Off (Indicator goes out):

In this position, you can switch sound character and adjust balance.

NOTE:

When this is on, sound character switching, balance adjustment, and

the use of components connected to the adaptor jack are impossible.

@) INPUT SELECTOR switch/indicators

Each time you press the switch, the source changes in the order LINE

2, LINE 1, DAT, PHONO, CD+TUNER.

Press the required number of

times to select your desired source.

©) MUTING switch/indicator

On (Indicator lights):

Press when you want to temporarily cut sound.

Off (Indicator goes out):

When you press it again, sound returns to its original level.

¢ When recording using a timer in conjunction with the FD-J7 and T-J7, .

muting automatically switches on during timer recording.

Use to adjust the volume level.

@ BALANCE control

Ordinarily, leave it in the center position. Adjust left and right balance

when necessary.

NOTE:

This control does not operate when the DIRECT switch is in the on

position.

PHONES jack

When using headphones, insert the plug into this jack. The output to

the speakers is cut automatically when connecting headphones.