Pioneer CLD-DS04 Betriebsanleitung - Seite 15
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CLD-DS04 herunter. Pioneer CLD-DS04 30 Seiten. Cd cdv ld player
APPLIED OPERATIONS
0_= _
To play an LD from the position where
playback was last stopped
If • or POWER is pressed during playback, and playback has not
reached the middle of the disc, it is possible
to restart playback
from the position where it was stopped.
When playback of an LD is stopped by pressing • or POWER, the
address where the playback is stopped
is stored in memory
and,
provided that the disc is left in the LD disc table, the stored ad-
dress is held in memory
even after the power is switched
off.
When you switch
the power on and press LAST MEMORY,
play-
back starts from the position where it was last stopped.
LAST
MEMORY
To start playback
directly
from
the position
where
it was
stopped:
Position
slightly before
Position where playback
was stopped
Press LAST MEMORY
once. Playback
starts from the position
slightly before the position where it was last stopped.
To start playback after reviewing
the plot from the begining
to the position where it was last stopped:
Start
/and
fast forward
.,_| _-__1
/ are repeated'
_
L_
1
Press LAST MEMORY
consecutively
twice. A short period of play-
back and fast forward operations
are repeated from the beginning
of the disc until slightly
before the position where
playback was
last stopped,
and normal playback starts from there. By pressing
LAST MEMORY again during the fast forward
operation,
playback
can be started
directly from slightly
before the position
where it
was last stopped.
NOTES
:
•
The last memory
playback
function
is available
only with
LDs. It is not available with CD and CDV discs.
•
If playback
was last stopped
in the middle
of side B of a
double-sided
disc, the last-memory
playback starts from side
B.
•
When I_ is pressed to start playback after it has been stopped
with •, playback starts from the beginning of the disc.
•
Be sure to leave the disc inside the player. The last-memory
playback is not possible once the disc has been taken out of
the player.
•
Be sure to plug the AC power cord into a power
outlet to
which power is supplied permanently.
I
udio switching
I
Every time AUDIO
D/A is pressed
during
playback,
the played
audio is switched. This makes it possible to;
•
listen to the analog audio of a disc with digital audio;
•
listen to only one of the two channels of a stereo disc;
•
select the audio to be played from multiplexed
audio disc.
LD with digital audio
It is possible to switch
between
the digital and analog audio and
between the L (Left) and R (Right) channels of stereo audio.
Digital audio
Analog audio
Analog audio
r
-
-
7
AUDIO
(stereo)
(stereo)
L CH
÷E 5
I_ Digital audio __ Digital audio __ Analog audio__J
R CH
L CH
R CH
•
In a case of a disc recorded with
Dolby AC-3 signal, only
the left channel signal is heard in monaural mode when an
analog audio is selected.
LD with analog audio
•
Disc containing CX auto ON (OFF) switching
codes
_
r_AUDIO r
Stereo
audio _
L CH
_0,-
R CH
•
Disc without CX auto ON (OFF) switching codes
CX OFF
CX ON
CX ON
AUDIO
_
(stereo)
"_'-_
(stereo)
--"
(L CH)
4.._
_
_
r_
CXOFF4__.__
CXOFF
____._
CXON
(RCH)
(LCH)
(RCH)
and
AUDIO
_
_
Stereo
audio
_
LCH
_P-
RCH
--7
LD with
E)._* mark
C)_ functions on the analog audio of LD.
With an LD carrying the C_,_4 m ark, audio can be played with
re-
duced noise using the CX noise reduction system.
Some of the discs carrying the E)_ mark do not contain the codes
for automatic
ON/OFF
switching
of the CX system.
With
such
discs, turn CX ON by pressing AUDIO D/A on the remote control
unit.
•
IC_,_4 is a trademark
of CBS. This player conforms to the extend-
ed specifications
of CX.
1 5
<VRB 1147>