Xerox DocuTech 6155 Planungshandbuch - Seite 34

Blättern Sie online oder laden Sie pdf Planungshandbuch für Software Xerox DocuTech 6155 herunter. Xerox DocuTech 6155 38 Seiten. Xerox docutech 6155: install guide
Auch für Xerox DocuTech 6155: Spezifikationsblatt (2 seiten), Erste Schritte (28 seiten), Planungshandbuch (20 seiten), Planungshandbuch (16 seiten), Freigabemitteilung (2 seiten), Handbuch installieren (2 seiten)

C.P. Bourg Document Finisher (BDFx)

Limitations

•

A Finisher Transport Module is required for in-line

connectivity to the printer.

•

A slight Cover Feeder feed mechanism adjustment may be

necessary when changing cover weights (lightweight stocks

may require a more precise adjustment).

•

For 11" x 17" / A3 simplex single fold only documents, paper

weight greater than 20 lb (80 gsm) are recommended.

•

For 8.5" x 11" / A4 simplex single fold only documents, the

N-1 face up orientation is required.

•

Currently coated stock is not recommended.

•

The BDFx can only be guaranteed to work to its maximum

book thickness when feeding (8.5 x 11 / A4) paper if the

paperweight is 90 gsm or less. (Long grain paper with a

weight above 90 gsm should be tested with the customer

paper and application before selling the BDFx.)

•

Use of short grain paper is highly recommended for 11 x 17"

/ A3 sized paper.

•

The Finisher Transport Module is required for in-line

connectivity to the printer.

•

Currently, a Xerox Document Stacker 5000 must be installed

in-line with the printer and the BDFx.

•

If there is a transition of an existing BCFx to a Nuvera Digital

Production System, an upgrade is needed.

Note: In case the floor at the customer site is very uneven, it is

recommended that the Nuvera IOT is installed and leveled with a

Caster Leveling Kit (kit number 498K07900).

6-2