Xerox DocuTech 6155 Manuel de planification - Page 34

Parcourez en ligne ou téléchargez le pdf Manuel de planification pour {nom_de_la_catégorie} Xerox DocuTech 6155. Xerox DocuTech 6155 38 pages. Xerox docutech 6155: install guide
Également pour Xerox DocuTech 6155 : Fiche technique (2 pages), Pour commencer (28 pages), Manuel de planification (20 pages), Manuel de planification (16 pages), Note de mise à jour (2 pages), Manuel d'installation (2 pages)

Imprimer la page
Xerox DocuTech 6155 Manuel de planification
C.P. Bourg Document Finisher (BDFx)

Limitations

System Dependencies and Prerequisites

•
A Finisher Transport Module is required for in-line
connectivity to the printer.
•
A slight Cover Feeder feed mechanism adjustment may be
necessary when changing cover weights (lightweight stocks
may require a more precise adjustment).
•
For 11" x 17" / A3 simplex single fold only documents, paper
weight greater than 20 lb (80 gsm) are recommended.
•
For 8.5" x 11" / A4 simplex single fold only documents, the
N-1 face up orientation is required.
•
Currently coated stock is not recommended.
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
Currently, a Xerox Document Stacker 5000 must be installed
in-line with the printer and the BDFx.
•
If there is a transition of an existing BCFx to a Nuvera Digital
Production System, an upgrade is needed.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
6-2