Xerox DocuTech 6155 계획 매뉴얼 - 페이지 34
{카테고리_이름} Xerox DocuTech 6155에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuTech 6155 38 페이지. Xerox docutech 6155: install guide
Xerox DocuTech 6155에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 시작하기 (28 페이지), 계획 매뉴얼 (20 페이지), 계획 매뉴얼 (16 페이지), 릴리스 노트 (2 페이지), 설치 매뉴얼 (2 페이지)
페이지 인쇄
C.P. Bourg Document Finisher (BDFx)
Limitations
System Dependencies and Prerequisites
•
A Finisher Transport Module is required for in-line
connectivity to the printer.
•
A slight Cover Feeder feed mechanism adjustment may be
necessary when changing cover weights (lightweight stocks
may require a more precise adjustment).
•
For 11" x 17" / A3 simplex single fold only documents, paper
weight greater than 20 lb (80 gsm) are recommended.
•
For 8.5" x 11" / A4 simplex single fold only documents, the
N-1 face up orientation is required.
•
Currently coated stock is not recommended.
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
Currently, a Xerox Document Stacker 5000 must be installed
in-line with the printer and the BDFx.
•
If there is a transition of an existing BCFx to a Nuvera Digital
Production System, an upgrade is needed.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
6-2