Clarke 7640130 Handbuch für Betrieb und Wartung - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Elektrowerkzeug Clarke 7640130 herunter. Clarke 7640130 20 Seiten. Pressurised sandblaster
Seite drucken
ASSEMBLY
FIT PRESSURE GAUGE TO THE TANK
1.
Screw the pressure gauge onto
the sandblaster as shown in Fig 1.
FIT HANDLE BARS TO THE TANK
1.
Lay the tank on a flat level surface
(such as a workbench or table
top), with the handlebar mounting
brackets facing up, as shown in Fig
2.
• Handlebars are labeled "LEFT"
and "RIGHT."
2. Align the holes in the left
handlebar with the handlebar
mounting brackets on the left side
of the tank.
3. Place a washer onto each of the four handlebar mounting screws. Insert a
screw through each of the holes in handlebar and mounting brackets,
4. Place a nut onto each of the screws and firmly tighten in place with a
wrench.
5. Repeat steps 2-4 for the right handlebar.
6
Fig 1
Fig 2