Clarke 7640130 Manuel d'utilisation et d'entretien - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Clarke 7640130. Clarke 7640130 20 pages. Pressurised sandblaster
Imprimer la page
ASSEMBLY
FIT PRESSURE GAUGE TO THE TANK
1.
Screw the pressure gauge onto
the sandblaster as shown in Fig 1.
FIT HANDLE BARS TO THE TANK
1.
Lay the tank on a flat level surface
(such as a workbench or table
top), with the handlebar mounting
brackets facing up, as shown in Fig
2.
• Handlebars are labeled "LEFT"
and "RIGHT."
2. Align the holes in the left
handlebar with the handlebar
mounting brackets on the left side
of the tank.
3. Place a washer onto each of the four handlebar mounting screws. Insert a
screw through each of the holes in handlebar and mounting brackets,
4. Place a nut onto each of the screws and firmly tighten in place with a
wrench.
5. Repeat steps 2-4 for the right handlebar.
6
Fig 1
Fig 2