Clarke 7640130 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke 7640130에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 7640130 20 페이지. Pressurised sandblaster

ASSEMBLY

FIT PRESSURE GAUGE TO THE TANK

Screw the pressure gauge onto

the sandblaster as shown in Fig 1.

Lay the tank on a flat level surface

(such as a workbench or table

top), with the handlebar mounting

brackets facing up, as shown in Fig

• Handlebars are labeled "LEFT"

and "RIGHT."

2. Align the holes in the left

handlebar with the handlebar

mounting brackets on the left side

of the tank.

3. Place a washer onto each of the four handlebar mounting screws. Insert a

screw through each of the holes in handlebar and mounting brackets,

4. Place a nut onto each of the screws and firmly tighten in place with a

wrench.

5. Repeat steps 2-4 for the right handlebar.

Fig 1

Fig 2