Zanussi ZOP38903 Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen Zanussi ZOP38903 herunter. Zanussi ZOP38903 24 Seiten. Product manaul
Auch für Zanussi ZOP38903: Benutzerhandbuch (24 seiten), Benutzerhandbuch (28 seiten)

Seite drucken
Zanussi ZOP38903 Benutzerhandbuch
Information on acrylamides
Important! According to the newest scientific knowledge, if
you brown food (specially the one which contains starch),

Care and cleaning

Warning! Refer to "Safety information" chapter.
• Clean the front of the appliance with a soft cloth with
warm water and a cleaning agent.
• To clean metal surfaces use a usual cleaning agent.
• Clean the oven interior after each use. Then you can re-
move dirt more easily and it does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all oven accessories after each use and let them
dry. Use a soft cloth with warm water and a cleaning
agent.
• If you have nonstick accessories, do not clean them
using aggressive agents, sharp-edged objects or a
dishwasher. It can destroy nonstick coating.
Stainless steel or aluminium appliances:
Clean the oven door with a wet sponge only. Dry it
with a soft cloth.
Do not use steel wool, acids or abrasive materials, as they
can cause damage to the oven surface. Clean the oven
control panel with the same precautions.
Shelf supports
You can remove the shelf supports to clean the side walls.
Removing the shelf supports
1
Pull the front of the
shelf support away from
the side wall.
Installing the shelf supports
Install the shelf supports in the opposite sequence.
16
2
1
2
Pull the rear end of the
shelf support away from
the side wall and remove
it.
acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown
food too much.
The rounded ends of the shelf supports must point
to the front.
Pyro Cleaning
Warning! The appliance becomes very hot. There is
a risk of burns.
Caution! If a hob is installed with the appliance, do
not use it at the same times as the Pyro Cleaning
function. It can cause damage to the appliance.
1.
Remove the removable shelf supports (if applicable)
and accessories from the appliance. Refer to "Re-
moving the shelf supports".
Caution! Do not let the removable shelf supports
stay in the appliance during Pyro Cleaning. There is
a risk of damage.
2.
Remove the worst dirt manually.
3.
Fully close the oven door.
The Pyro Cleaning procedure cannot start if you do
not close the oven door.
4.
Press
again and again until the display shows
.
– The display shows P1 and
er.
– An acoustic signal sounds as a reminder to re-
move all accessories and shelf supports from the
oven.
– The clock display shows 1:30.
– Duration
flashes.
5.
When
flashes, press + or - to set the necessary
procedure:
• P1 - if the oven is not very dirty. The procedure is
1 h 30 min long.
• P2 - if the oven is more dirty. The procedure is 2
h 30 min long.
6.
Press
to start the procedure.
one after the oth-
www.zanussi.com