Directed Electronics Xpresskit DBALL Installationshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge Directed Electronics Xpresskit DBALL herunter. Directed Electronics Xpresskit DBALL 14 Seiten. Databus all combo bypass module
Auch für Directed Electronics Xpresskit DBALL: Installationshandbuch (14 seiten)
Seite drucken
Platform: DBALL
Firmware: GM5
Installation Type 4
Driver Door
Sense Trigger
You need to connect these
wires together. These
connections are required for
the module work properly.
* If applicable - see the Function List.
Not required in D2D mode.
The Mobile Integration Systems
Hood Switch
(+) Brake Input
BCM Side
Key Side
6
5
4
3
White or White/Blue
2: Purple/Yellow: J1850
7: Brown
8: Yellow: R. Code (Car Side)
9: Orange/Yellow: R. Code (Key Side)
(+) 12v
13: Red: (+) 12v
(-) Ground
14: Black: (-) Ground
1: Black/White: RAP OFF
3: Green/White: (-) Door Status Output*
5: Violet/White: (AC) Tach Output
8: Violet/Green: R. Code (Car Side)
9: Violet/Brown
(AC) Tach Input
(-) Door Status Input*
(+) Accessory Output
(+) Ignition Output
2
1
Green or Black Connector
located at the ignition switch.
RF Loop Connector
Programming button
DBALL
LED
Vehicle CAN Bus Integration System
Parking Lights
(+) 12 V Input
Ground
(-) Lock Output*
(-) Unlock Output*
(+) Starter Output
(+) Ignition Output
(-) GWR (Status)
1
8
9
16
Diagnostic connector
OBDII (connector side view)
10: Blue/White: (-) GWR (Status) Input
9: Pink: (+) Ignition Input
8: Violet: (+) Starter Input
2: Blue: (-) Unlock Input*
1: Green: (-) Lock Input*
(+)12v
RX
(-) Ground
TX
P#: XKD2D65
© 2010 Directed Electronics. All rights reserved.
Rev.: 20101103
Page 7