Clarke 6462199 Handbuch für Betrieb und Wartung - Seite 12
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Werkzeuge Clarke 6462199 herunter. Clarke 6462199 17 Seiten. Multi function tool
Seite drucken
USING THE SCRAPER
The scraper is used to remove paint, sealant, adhesives and vinyl/fabrics from
a workpiece.
1. Hold the tool tightly and move the
On/Off switch forward.
2. Put the tool against the workpiece
at a low angle and apply light
pressure to the scraper blade.
• Let the tool to do the work and
do not apply excessive
pressure, which can cut into
the surface and overload the
tool.
NOTE: The scraping blade is designed for scraping soft materials from flat
surfaces.
NOTE: The scraper blade is sharp and can dig into the surface of soft
materials such as timber in the same way as a chisel.
USING THE SAW ATTACHMENT
The saw attachment is used to cut materials such as wood, plastics and sheet
metal such as aluminium.
CAUTION: CLAMP THE WORKPIECE SECURELY IF POSSIBLE BEFORE
STARTING WORK.
CAUTION: ALWAYS CHECK THAT THERE ARE NO NAILS OR SCREWS IN THE
WORKPIECE BEFORE CUTTING.
NOTE: Ensure the blade is sharp and not damaged before starting work.
SAWING WITH THE STRAIGHT BLADE
1. Hold the tool tightly and move the
On/Off switch forward.
2. If making a plunge cut use a slight
pendulum motion to allow chip/
debris removal.
NOTE: Plunge cuts should only be
attempted on soft materials
such as softwood and
plaster boards.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
12