Clarke 6462199 Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 12
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Strumenti Clarke 6462199. Clarke 6462199 17. Multi function tool
Stampa la pagina
USING THE SCRAPER
The scraper is used to remove paint, sealant, adhesives and vinyl/fabrics from
a workpiece.
1. Hold the tool tightly and move the
On/Off switch forward.
2. Put the tool against the workpiece
at a low angle and apply light
pressure to the scraper blade.
• Let the tool to do the work and
do not apply excessive
pressure, which can cut into
the surface and overload the
tool.
NOTE: The scraping blade is designed for scraping soft materials from flat
surfaces.
NOTE: The scraper blade is sharp and can dig into the surface of soft
materials such as timber in the same way as a chisel.
USING THE SAW ATTACHMENT
The saw attachment is used to cut materials such as wood, plastics and sheet
metal such as aluminium.
CAUTION: CLAMP THE WORKPIECE SECURELY IF POSSIBLE BEFORE
STARTING WORK.
CAUTION: ALWAYS CHECK THAT THERE ARE NO NAILS OR SCREWS IN THE
WORKPIECE BEFORE CUTTING.
NOTE: Ensure the blade is sharp and not damaged before starting work.
SAWING WITH THE STRAIGHT BLADE
1. Hold the tool tightly and move the
On/Off switch forward.
2. If making a plunge cut use a slight
pendulum motion to allow chip/
debris removal.
NOTE: Plunge cuts should only be
attempted on soft materials
such as softwood and
plaster boards.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
12