Clarke CHT637 Betriebs- und Wartungsanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Werkzeuge Clarke CHT637 herunter. Clarke CHT637 16 Seiten. Air operated clutch & brake bleeding kit

Seite drucken

Clarke CHT637 Betriebs- und Wartungsanleitung

2. Make sure all the bleed screws

are clean.

3. Connect compressed air supply

to the Air Valve (I).

4. Connect the adaptor (E) of the Bleed

Tube (F) to the Fluid Inlet Plug (G).

Note: Consult the vehicle manufacturers

guidelines for the vacuum

bleeding procedure and any

specific wheel bleeding sequence.

5. Slip the Bleed Connector (J) located on

the opposite end of the Bleed Tube (F),

over the bleed screw nipple on the

vehicle.

6. Fill the refill unit with fresh hydraulic fluid

and secure it to the master cylinder with

the nozzle (O) immersed below the level

of the old fluid. Open the refill valve (M).

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]