Clarke CHT637 Istruzioni per il funzionamento e la manutenzione - Pagina 9

Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Strumenti Clarke CHT637. Clarke CHT637 16. Air operated clutch & brake bleeding kit

Stampa la pagina

Clarke CHT637 Istruzioni per il funzionamento e la manutenzione

2. Make sure all the bleed screws

are clean.

3. Connect compressed air supply

to the Air Valve (I).

4. Connect the adaptor (E) of the Bleed

Tube (F) to the Fluid Inlet Plug (G).

Note: Consult the vehicle manufacturers

guidelines for the vacuum

bleeding procedure and any

specific wheel bleeding sequence.

5. Slip the Bleed Connector (J) located on

the opposite end of the Bleed Tube (F),

over the bleed screw nipple on the

vehicle.

6. Fill the refill unit with fresh hydraulic fluid

and secure it to the master cylinder with

the nozzle (O) immersed below the level

of the old fluid. Open the refill valve (M).

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]