3D Hobby Shop 62 inch OSIRIS Montageanleitung - Seite 8

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3D Hobby Shop 62 inch OSIRIS herunter. 3D Hobby Shop 62 inch OSIRIS 14 Seiten.

Seite drucken
8
Glue elevator joiner into one elevator half with thick CA or epoxy glue. Allow to cure.
Insert elevator half with joiner into stabilizer, install with two large drops of thin CA glue on each hinge.
Trail-fit second elevator half with no glue. Check for alignment between elevator halves. Correct joiner
slot in second elevator as necessary.
Install second elevator half, using thick CA or epoxy on joiner and two drops of thin CA on each hinge.