3DHS SLICK 580 Montageanleitung - Seite 11
Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3DHS SLICK 580 herunter. 3DHS SLICK 580 16 Seiten.
Seite drucken14. Use your Xacto knife to open a slot in the bottom of the rudder to accept
the tailwheel wire. Make sure the portion of wire that will reside in the
aluminum mounting bracket is flush with the rudder bevel. Secure the wire
with CA. A piece of strapping tape placed over the slot will add strength and
durability to this area.
15. Slide the metal bracket into position and then place the tailwheel onto the
wire and secure with a wheel collar.
11