3DHS SLICK 580 Montaj Kılavuzu - Sayfa 11
Oyuncak 3DHS SLICK 580 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 3DHS SLICK 580 16 sayfaları.
Sayfayı Yazdır14. Use your Xacto knife to open a slot in the bottom of the rudder to accept
the tailwheel wire. Make sure the portion of wire that will reside in the
aluminum mounting bracket is flush with the rudder bevel. Secure the wire
with CA. A piece of strapping tape placed over the slot will add strength and
durability to this area.
15. Slide the metal bracket into position and then place the tailwheel onto the
wire and secure with a wheel collar.
11