3DHS SLICK 580 Montaj Kılavuzu - Sayfa 10

Oyuncak 3DHS SLICK 580 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 3DHS SLICK 580 16 sayfaları.

12. Remove the covering over the slot on the bottom of the elevator where the

elevator control horn will be installed. Scuff the portion of the control horn

that will insert into the elevator with sandpaper. Secure the control horn with

medium CA

13. Attach your servo extension to the elevator servo and install the elevator

servo with the output spline toward the rear of the model. Assemble the

linkage and install as per the picture.