3DHS SLICK 580 조립 설명서 - 페이지 10

{카테고리_이름} 3DHS SLICK 580에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3DHS SLICK 580 16 페이지.

12. Remove the covering over the slot on the bottom of the elevator where the

elevator control horn will be installed. Scuff the portion of the control horn

that will insert into the elevator with sandpaper. Secure the control horn with

medium CA

13. Attach your servo extension to the elevator servo and install the elevator

servo with the output spline toward the rear of the model. Assemble the

linkage and install as per the picture.