3DHS SLICK 580 Instrukcja montażu - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Zabawka 3DHS SLICK 580. 3DHS SLICK 580 16 stron.

Drukuj stronę
12. Remove the covering over the slot on the bottom of the elevator where the
elevator control horn will be installed. Scuff the portion of the control horn
that will insert into the elevator with sandpaper. Secure the control horn with
medium CA
.
13. Attach your servo extension to the elevator servo and install the elevator
servo with the output spline toward the rear of the model. Assemble the
linkage and install as per the picture.
10