3DHS SLICK 580 Montageanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Montageanleitung für Spielzeug 3DHS SLICK 580 herunter. 3DHS SLICK 580 16 Seiten.

12. Remove the covering over the slot on the bottom of the elevator where the

elevator control horn will be installed. Scuff the portion of the control horn

that will insert into the elevator with sandpaper. Secure the control horn with

medium CA

13. Attach your servo extension to the elevator servo and install the elevator

servo with the output spline toward the rear of the model. Assemble the

linkage and install as per the picture.