3Dlabs X400 Schnellstart & Referenzhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Schnellstart & Referenzhandbuch für 3D-Drucker 3Dlabs X400 herunter. 3Dlabs X400 16 Seiten.
Seite drucken
7) Retighten the tension screw on the left a fair amount so that the spring is semi tight. It does not
have to be super tight. Typically, an 1/8-inch (3mm) gap is a good place. Tug on the filament lightly
and you should feel some resistance. This is normal, it means that the extruder is gripping the
filament, which is what we want.
8)
Press the "Material" button on the
touch screen interface.
Page | 10