3Dlabs X400 Quick Start & Reference Manual - Page 10

Browse online or download pdf Quick Start & Reference Manual for 3D Printers 3Dlabs X400. 3Dlabs X400 16 pages.

Print Page

7) Retighten the tension screw on the left a fair amount so that the spring is semi tight. It does not

have to be super tight. Typically, an 1/8-inch (3mm) gap is a good place. Tug on the filament lightly

and you should feel some resistance. This is normal, it means that the extruder is gripping the

filament, which is what we want.

Press the "Material" button on the

touch screen interface.

Page | 10