3Dlabs X400 Hızlı Başlangıç ve Referans Kılavuzu - Sayfa 10

3D Yazıcılar 3Dlabs X400 için çevrimiçi göz atın veya pdf Hızlı Başlangıç ve Referans Kılavuzu indirin. 3Dlabs X400 16 sayfaları.

7) Retighten the tension screw on the left a fair amount so that the spring is semi tight. It does not

have to be super tight. Typically, an 1/8-inch (3mm) gap is a good place. Tug on the filament lightly

and you should feel some resistance. This is normal, it means that the extruder is gripping the

filament, which is what we want.

Press the "Material" button on the

touch screen interface.

Page | 10