esera auto connect 11221 Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Dimmer esera auto connect 11221 herunter. esera auto connect 11221 7 Seiten. 1-wire dual dimmer 1 with pushbutton inputs (extension input)

Seite drucken
Art. No. 11221
with pushbutton inputs (extension input)
 2 channel dimmer with smooth dimmer behavior
 max. 460VA/W Power per channel*
 2 Pushbutton control (extension input)
 2 buttons on top of module
 Control inputs for 1-wire bus system
 LED display for dimmer values
 Phase angle control technology for
 Dimmable LED lights
 Halogen lamps high voltage 230V
 Low-voltage halogen lamps with
wound transformers
 light bulbs
 DIN rail housing for control cabinet installation
 Simple software control
 Low space requirement in the control cabinet
 Simple assembly
1
Introduction
Before you start with the installation of the Dual Dimmer 1 and put the device into operation, please read these
installation and operating instructions carefully until the end, especially the section of the safety instructions.
2
Product Description
With the Dual Dimmer 1 you can dim and switch lamps very gently.
The brightness of the connected lamps can be controlled or switched on/off by the push-button dimmer function in
the living room (extension input), by push-buttons on the top of the module and electronically via the 1-wire
interface. Any buttons from all switch ranges can be used for the push-button dimmer function. The dimmer
behavior is always very soft and pleasant.
You can change the brightness by pressing the living area buttons for a long time and switch on/off by briefly
pressing the button.
The touch dimmer function works with 12V or 24V DC voltage, which does not give off any disturbance in the
living room. This makes the Dual Dimmer 1 ideal for low-radiation areas such as bedrooms and living rooms.
The ESERA manual control allows you to operate the lighting reliably. Everything functions as in a "normal
house", even without Smart Home control or software.
The 1-Wire Bus interface is available for integration into your Smart Home control system.
*
When installed in distribution cabinets with low heat dissipation, e.g. installed in wooden or (RI) plaster walls, the connected
load must be reduced by 25%, also when the ambient temperature rises above 25°C.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
User Guide
1-Wire Dual Dimmer 1
11221 V2.0 R1.0 Manual
Page 1 von 7