esera auto connect 11221 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Dimmer esera auto connect 11221 herunter. esera auto connect 11221 7 Seiten. 1-wire dual dimmer 1 with pushbutton inputs (extension input)

Seite drucken
Art. No. 11221
5

Ambient conditions

Temperature, operation 0°C to +40°C,from 25°C the output load must be reduced, see technical data
Air humidity:
Dimensions:
Protection class:
Protection system:
Insulation strength:
6

Wiring diagram

The connection diagram is available in the shop as a separate document.
Connection topside
14 = Neutral input 230VAC
15 = Input phase 230VAC
19 = Dimmer output 1
18 = Dimmer output 2
Module bottom
Push-button input / manual controll
Control voltage 10-30VDC
1 = GND (ground) Push-button Input
2 = Push-button channel 1, on/off/dimming
3 = Push-button channel 2, on/off/dimming
7
Conformity
EN 50090-2-2,
EN 61000-4-2, ESD
EN 61000-4-3, HF
EN 61000-4-4, Burst
EN 61000-4-5, Surge
EN 61000-6-1, noise immunity
EN 61000-6-3, Interference radiation
RoHS
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
10 - 92% (non condensing)
70 x 90 x 70mm (WxHxD)
II
IP20
500VAC output to 1-Wire Bus, 500VAC push-button interface to 1-Wire Bus
11221 V2.0 R1.0 Manual
1-Wire Bus
10 = +12V external voltage (optional)
11 = GND (ground)
12 = 1-Wire data cable
13 = +12V voltage
Page 3 von 7