esera auto connect 11221 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Dimmer esera auto connect 11221 herunter. esera auto connect 11221 7 Seiten. 1-wire dual dimmer 1 with pushbutton inputs (extension input)

Seite drucken
8
Operating mode, display and operation
The Dual Dimmer 1 has two operating modes, normal mode and submenu.
The behavior of the dimmer can be changed via the submenu.
8.1
Normal operation
After commissioning, the device is in normal operation. The two dimmer channels can be controlled via the
buttons on the top of the module, the external binary inputs or via the 1-wire interface.
The current dimmer values are shown on the LED display in 25% steps.
8.2
Submenu for dimmer behavior
If you press both buttons on the top of the module simultaneously for 3 seconds, the module switches to the
submenu where you can change the dimmer behavior.
If the dual dimmer 1 is in this menu, the status LED flashes continuously fast. The selected menu option is
animated by the upper row of LEDs.
If you do not use a button for 3 seconds, the Dual Dimmer 1 automatically switches to normal operation.
Functions of the module buttons in the submenu
Button 1: Select mode (currently the Dual Dimmer 1 has two modes to choose from)
Button 2: Mode on/off.
Mode 1 (LED 25%): dimmer on/off hard or soft
Mode 1 can be used to select how the dimmer behavior is to behave on a short keystroke (output on/off).
You can choose between soft and hard.
Mode 2 (LED 50%): dimmer on/off, 0/100% or 0/last dimmer value
Mode 2 can be used to select whether the dimmer value changes to 100% or to the last stored value after
briefly pressing the button.
9
Brightness control Dimmer
The dimmer channels can be controlled directly via the two buttons on the top of the module.
With a short push of a button the corresponding output is switched on or off.
A long press of the button makes the brightness brighter or darker.
The current dimmer value is shown on the LED display on the top of the module in 25% steps.
For further details on the ESERA-Automation lighting system, please refer to the web page
https://www.esera.de/smart-home/anwendungsbeispiele/lichtsteuerung/
Display
Designation
LED 1-8
Output 1-8
LED PWR
Power
LED Status
Status display
Pushbutton Designation
Channel 1
Dimmer 1
Up/Down
on/off diming
Channel 2
Dimmer 1
Up/Down
on/off diming
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
Function LED
- LED upper row
Dimmer value in 25% steps Channel 1
- LED upper row
Dimmer value in 25% steps Channel 2
- LED- power indicator
- LED lights up for 2 seconds to start the system
- Flashing with new dimmer values
Function Pushbutton
- Control Dimmer 1:
Short press on/off, long press Dimmer brighter/darker
- Submenu Selection of the dimmer function
- Control Dimmer 2:
Short press on/off, long press Dimmer brighter/darker
- Submenu Function selection
11221 V2.0 R1.0 Manual
Page 4 von 7