djm direct DJMSS406 Betriebshandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Säge djm direct DJMSS406 herunter. djm direct DJMSS406 19 Seiten. Scroll saw

Changing the flat saw-blade

(Optional Feature #1)

1. Take out the adapter. Fix the saw-blade with

allen screws using allen wrench.

2. Extract the saw-blade by sliding the table's inlay

up, then unscrew the clamping screw.

3. Slightly press the upper arm down.

4. Then remove the saw-blade by pulling it

forward out of the supports and through the

access perforation in the table

5. Put the saw-blade with the two adapter into

the lower support, the other end into the upper

support.

6. Slight press the upper arm down before

hooking it in.

7. Tighten the blade with the tightening screw

by rotating it clockwise. Check the tightness of

the blade. Keep on rotating clockwise in order to

tighten the blade even more.