djm direct DJMSS406 운영 매뉴얼 - 페이지 11

{카테고리_이름} djm direct DJMSS406에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. djm direct DJMSS406 19 페이지. Scroll saw

Changing the flat saw-blade

(Optional Feature #1)

1. Take out the adapter. Fix the saw-blade with

allen screws using allen wrench.

2. Extract the saw-blade by sliding the table's inlay

up, then unscrew the clamping screw.

3. Slightly press the upper arm down.

4. Then remove the saw-blade by pulling it

forward out of the supports and through the

access perforation in the table

5. Put the saw-blade with the two adapter into

the lower support, the other end into the upper

support.

6. Slight press the upper arm down before

hooking it in.

7. Tighten the blade with the tightening screw

by rotating it clockwise. Check the tightness of

the blade. Keep on rotating clockwise in order to

tighten the blade even more.