3M Digital Projector X75 Handbuch zur Produktsicherheit - Seite 12
Blättern Sie online oder laden Sie pdf Handbuch zur Produktsicherheit für Projektor 3M Digital Projector X75 herunter. 3M Digital Projector X75 14 Seiten. Safety guide
Auch für 3M Digital Projector X75: Broschüre & Specs (4 seiten), Schnellstart-Handbuch (4 seiten), Schnellstart-Handbuch (4 seiten), Spezifikationen (2 seiten)
Seite drucken
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1. Remove lamp access door: The lamp access door is located on the bottom of the machine.
Please unhook the claws of the lamp door (1), and remove the lamp door.
2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (3)
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (3) to secure the lamp module in place.
Optional Lamp: 78-6969-9797-8 (Contact 3M customer Service.)
Insert the hinge tabs on the bottom of the lamp access door, then
claws (1) to fix the lamp door.
Reset the lamp operation hours. See "Reset Lamp Hours" for details.
(2) Lamp access door
(1) Claws
12
√ Note
√ Note
√ Note
(3) Screws
3M™ Multimedia Projector X75 Product Safety Guide
(2)
push the center point of two
(4) Handles
© 3M 2005