3M Digital Projector X75 Manual de Segurança do Produto - Página 12

Procurar online ou descarregar pdf Manual de Segurança do Produto para Projetor 3M Digital Projector X75. 3M Digital Projector X75 14 páginas. Safety guide
Também para 3M Digital Projector X75: Brochura e especificações (4 páginas), Manual de início rápido (4 páginas), Manual de início rápido (4 páginas), Especificações (2 páginas)

3M Digital Projector X75 Manual de Segurança do Produto
For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.
Also, do not install an old or previously used lamp.
1. Remove lamp access door: The lamp access door is located on the bottom of the machine.
Please unhook the claws of the lamp door (1), and remove the lamp door.
2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (3)
All lamp module screws must be loosened. These screws are self-containing screws that
cannot be removed from the lamp module or access door.
3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (3) to secure the lamp module in place.
Optional Lamp: 78-6969-9797-8 (Contact 3M customer Service.)
Insert the hinge tabs on the bottom of the lamp access door, then
claws (1) to fix the lamp door.
Reset the lamp operation hours. See "Reset Lamp Hours" for details.
(2) Lamp access door
(1) Claws
12
√ Note
√ Note
√ Note
(3) Screws
3M™ Multimedia Projector X75 Product Safety Guide
(2)
push the center point of two
(4) Handles
© 3M 2005