Fleetwood LI-Cocktail Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender Fleetwood LI-Cocktail herunter. Fleetwood LI-Cocktail 6 Seiten. Professional blender

Seite drucken

Tabela-02

PROBLEMS

CAUSES

Machine does not turn

Electricity shortage or

machine is unplugged

Problem in the machine

electrical circuit internal

or external

Cup leakage

Problem with the seal

The product does not

Product is too big for

grind

blades size.

Knife blades are blunt.

5.2- Electric Diagram Model LI-0,5 (110V/220V)

ON/OFF Switch

SOLUTIONS

Check if plug is connect

to power source

Call

Technical

Assistance

Call

Technical

Assistance

Cut the product into

smaller

pieces

–

approximately 2,0cm

Call

Technical

Assistance

Motor

110 ou 220

Volts

1. INTRODUCTION

1.1 Safety

When using this equipment, keep in mind some basic safety

precautions:

1.1.1 Read all the instructions.

1.1.2

In order to avoid the risk of electric shocks and damage to the

machine, never install equipment on a wet or humid surface nor dip it in water

or any other liquid.

1.1.3 The use of the equipment must be supervised when used next

to children.

1.1.4 Before cleaning and when not in use or before to insert or

remove accessories, disconnect the machine from power source.

1.1.5 Avoid the contact with moving parts of the machine.

1.1.6 Do not use the equipment if cord or plug are damaged. Do not

use the equipment if it is not working properly. In case that happens, take the

equipment to Technical Assistance Service.

1.1.7 The use of not original spare parts may cause personal hurt.

1.1.8 Keep your hands or any tool out of the machine while operating

to avoid personal hurt or any damage to the equipment. If it would be

necessary to make a mixture, turn it off, unplug and use a rubber spatula.

1.1.9 The blades are very sharp. Handle with care.

1.1.10 When working hot liquids, remove the transparent cover from

the cup lid and keep your hands away from it, avoiding possible burns.

1.1.11 Do not use this machine on the open air.

1.1.12 Do not leave the cord hanging out from the table or counter or

lying on hot surfaces

1.1.13 Do not leave unattended while operating.

1.1.14 Before cleaning or maintenance disconnect machine from

power source.

1.1.15 Never use tools not belonging to machine to help operation.

1.1.16 Never throw water or other liquid substances directly to the

machine.

1.1.17 Never connect power source with wet feet or wet clothes.