Fleetwood LI-Cocktail Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blender Fleetwood LI-Cocktail herunter. Fleetwood LI-Cocktail 6 Seiten. Professional blender
Seite drucken
1.2 Main Components
01- Motor Housing
02- Cup
03- Lid
04- ON/OFF/PULSE
Switch
1.3 Technical Characteristics
DATE
Voltage
Frequency
Rating
Consumption
TABLE – 01
Height
Width
Depth
Net Weight
Gross Weight
Cup Maximum Capacity
Rotation
*Motor voltage shall be only one.
IMPORTANT
** The maximum capacity permitted is 0,5 (half liter) although the cup
volume is bigger. Such bigger volume is to avoid overflow.
IMPORTANT
Metalúrgica Siemsen is not responsible for any damage caused
when using not original spare parts.
2. INSTALLATION and PRE-OPERATION
2.1 Installation
The blender must be installed on a leveled surface with a
recommended height of 850mm. The voltage of the unit must be the same
as the power source, check the label of the cord.
02
PIC.01
03
02
01
04
LI-Cocktail
U.M.
[V]
110 ou 220 *
[Hz]
50 ou 60 *
[W]
250
[kW/h]
0,25
[mm]
315
[mm]
157
[mm]
157
[kg]
2,3
[kg]
2,6
[L]
0,5 (**)
[ rpm]
23000
4.5
After Finishing The Work
4.5.1 Precautions
Always TURN THE MACHINE OFF by removing the plug from the socket
before cleaning the machine. Never clean the machine unless it has come to a
complete stop. Put all components back to their functional positions before turning
it ON again. Check level of oil. DO NOT place your fingers in between belts and
pulleys nor chains and gears.
4.6
Maintenance
4.6.1 Danger
Any maintenance with the machine in working situation is dangerous.
TURN IT OFF BY PULLING THE PLUG OFF THE SOCKET DURING
MAINTENANCE.
IMPORTANT
Always unplug the machine when emergency cases arise.
4.7
Advice
Electrical or mechanical maintenance must be done by qualified personal
for such operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY
conditions when working.
5
- Problems analysis and solutions
5.1
causes and solutions
The LI-0,5 Professional Blender was designed to need very little
maintenance. However, some irregularities may occur due to the natural wearing.
If you face any kind of problem with your equipment, please refer to the
chart -02 where you will find some possible recommended solutions.
07