Etac Molift Mover 180 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hebesysteme Etac Molift Mover 180 herunter. Etac Molift Mover 180 16 Seiten. Electric patient lift
Auch für Etac Molift Mover 180: Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (6 seiten)

Seite drucken

• Insert the battery into the holder on the

column with the two battery terminals facing

downwards. Run the empty lift up and down

a few times to make sure that it is working

proerly. (The batteries should always be charged

prior to use.)

• Install the suspension as shown in pictures

below. Align supension in fork. Insert locking

pin. Make sure locking pin is properly fastened.

BM08101 Molift MOVER 180 English - Rev C 19.12.2013

Dismantling

• Remove the suspension.

• Run the lifting arm into its lowest position.

• Remove the hand control and battery from the

lift to prevent it from falling out in transit.

• Remove both Allen screws on the front and rear,

and remove the column.

Take care to ensure that your feet and arms do

not get caught when the column and lifting

arm are being lowered.

Storage and transportation

- Storage: For long time storage it is

recommended that the battery is removed and

the emergency stop button is activated. The

lifter can be stored and transported under the

following conditions:

• Pressure: 70 - 106 kPa

• Humidity: 15 - 93 %

• Temperature: -25 - 70 °C

- The lifter is designed for use at standard room

temperatures (+5 to +40°C). Following storage

or transport at other temperatures leave the

lifter in a room with a suitable temperature until

it reaches a safe operating temperature.

Page 5 of 16