CYP CH-506TX Betriebshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Extender CYP CH-506TX herunter. CYP CH-506TX 13 Seiten. Hdmi/ir/rs-232 over single cat5e/cat6 extender
Auch für CYP CH-506TX: Betriebshandbuch (16 seiten), Betriebshandbuch (16 seiten), Betriebshandbuch (9 seiten), Betriebshandbuch (16 seiten)
Seite drucken
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
IR2 Extender
RS232 In
IR1 Blaster
1
2
1
RS-232 In: Connect to a PC/laptop or RS-232 enabled device(with
supplied 3.5 mm phone jack to D-Sub 9 pin adaptor) for the
transmission of RS-232 commands.
2
IR2 Extender: Connect to the supplied IR extender cable for IR
signal reception. Ensure that remote controller being used is within
the direct line-of-sight of the IR extender.
3
IR1 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
4
HDMI In: Connect to HDMI source equipment such as a DVD or Blu-
ray player.
5
DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
6
Link: The yellow LED will illuminate when both the input and output
CAT5e/6 signals are connected.
7
Power: This green LED will illuminate when the device is connected
to a power supply.
8
CAT5e/6 Out: Connect to the receiver unit with a single CAT5e/6
cable for transmission of all data signals.
3
HDMI In
3
4
Rear
DC 5V
Power
Link
5
6
7
CAT 5e /6 Out
8