Ambifuego KALIDO 73 Installations-, Bedienungs- und Wartungsanleitung - Seite 8

Blättern Sie online oder laden Sie pdf Installations-, Bedienungs- und Wartungsanleitung für Innenkamin Ambifuego KALIDO 73 herunter. Ambifuego KALIDO 73 15 Seiten. Convector gas fire

Seite drucken

Closing the Glass Door.

1 Place the glass door in position over the studs on the heat exchanger making sure the

joint in the rope seal lies along the lower edge. Secure in position with the 2 nuts and 2

screws. Tighten evenly.

Installing The Decorative Frame.

Hook the decorative frame over the supporting lugs within the convector box.

OMMISSIONING

WARNING.

This appliance is fitted with a spillage monitoring system consisting of a flue

temperature switch. Should the chimney become blocked, the sensor will become

hot, and the appliance will go out. The installer must not attempt to adjust this

system, nor shall he put it out of operation. Should any part of this system need to

be replaced, only original manufacturers parts shall be used.

Before attempting to light the appliance the gas supply must be turned on by removing

the cap from the isolator fitting and unscrewing the plug all the way out. Replace the cap

making sure that the tab engages with the slot in the top of the plug. Tighten the cap

securely. Light the appliance in accordance with the instructions in the lighting section.

Briefing the User

Demonstrate the full operation of the appliance to the customer.

Inform the customer that all cleaning procedures should be carried out only when the

appliance is cold.

Leave these instructions with the customer.

Advice the importance of having the appliance serviced and the chimney checked for

clearance of combustion products on an annual basis.

ERVICE AND

AINTENANCE

BEFORE ANY SERVICING IS CARRIED OUT ISOLATE THE APPLIANCE FROM THE

GAS SUPPLY. AFTER REFITTING THE APPLIANCE, CHECK FOR GAS

SOUNDNESS AT ALL GAS JOINTS AND TEST FOR SPILLAGE.

This product may use fuel effect pieces containing Refractory Ceramic Fibre

(RCF). This material contains man-made vitreous silicate fibres. Excessive

exposure to these materials may cause temporary irritation to eyes, skin and

respiratory tract; consequently, it makes sense to take care when handling these

articles to ensure that the release of dust is kept to a minimum.