Canon Color imageCLASS MF8170c Manual de la red - Página 11

Navegue en línea o descargue pdf Manual de la red para Impresora todo en uno Canon Color imageCLASS MF8170c. Canon Color imageCLASS MF8170c 48 páginas. Color laser copier printer scanner fax with network
También para Canon Color imageCLASS MF8170c: Instrucciones de instalación (1 páginas), Instrucciones adicionales (2 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (8 páginas), Manual de Ui Remota (40 páginas), Especificación (2 páginas)

Specifying the Network Settings

This chapter describes the settings and procedures necessary to connect and use the

machine with a TCP/IP network.

To use a TCP/IP network, it is necessary to perform the following procedures.

Network Cable Connection (See "To Use the Machine as a Network Printer

(Network Connection)," in the Set-Up Instructions for Networking and

Printing.)

Connect the network cables in accordance with the Set-Up Instructions for Networking and Printing.

Preparation for Protocol Settings (See "Preparation for Protocol Settings," on

p. 2-3.)

Specify the machine's basic protocol settings for communication between the machine and computers using

the machine. To specify the settings, use:

•

The machine's operation panel

•

NetSpot Device Installer (Canon utility software included in the User Software CD)

•

ARP/PING commands

Protocol Settings (See "Protocol Settings," on p. 2-10.)

Specify the machine's advanced protocol settings. To specify the settings, use:

•

NetSpot Console (via a web browser) (Canon utility software)

•

A web browser (Remote UI)

Computer Settings for Printing (See "Setting Up a Computer for Printing," on

p. 2-15.)

Specify the settings for each computer you use for printing.

IMPORTANT

•

It is recommended that the network manager perform steps 1, 2, and 3 above.

TCP/IP Network Setup Procedures

CHAPTER

2-1