Canon Color imageCLASS MF8170c 네트워크 매뉴얼 - 페이지 11

{카테고리_이름} Canon Color imageCLASS MF8170c에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Color imageCLASS MF8170c 48 페이지. Color laser copier printer scanner fax with network
Canon Color imageCLASS MF8170c에 대해서도 마찬가지입니다: 설치 지침 (1 페이지), 추가 지침 (2 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 원격 UI 매뉴얼 (40 페이지), 사양 (2 페이지)

페이지 인쇄
Canon Color imageCLASS MF8170c 네트워크 매뉴얼

Specifying the Network Settings

This chapter describes the settings and procedures necessary to connect and use the
machine with a TCP/IP network.

TCP/IP Network Setup Procedures

To use a TCP/IP network, it is necessary to perform the following procedures.
Network Cable Connection (See "To Use the Machine as a Network Printer
1
(Network Connection)," in the Set-Up Instructions for Networking and
Printing.)
Connect the network cables in accordance with the Set-Up Instructions for Networking and Printing.
Preparation for Protocol Settings (See "Preparation for Protocol Settings," on
2
p. 2-3.)
Specify the machine's basic protocol settings for communication between the machine and computers using
the machine. To specify the settings, use:
•
The machine's operation panel
•
NetSpot Device Installer (Canon utility software included in the User Software CD)
•
ARP/PING commands
3
Protocol Settings (See "Protocol Settings," on p. 2-10.)
Specify the machine's advanced protocol settings. To specify the settings, use:
•
NetSpot Console (via a web browser) (Canon utility software)
•
A web browser (Remote UI)
Computer Settings for Printing (See "Setting Up a Computer for Printing," on
4
p. 2-15.)
Specify the settings for each computer you use for printing.
IMPORTANT
•
It is recommended that the network manager perform steps 1, 2, and 3 above.
TCP/IP Network Setup Procedures
2
CHAPTER
2-1