- ページ 11
オール・イン・ワン・プリンター Canon Color imageCLASS MF8170cのPDF ネットワーク・マニュアルをオンラインで閲覧またはダウンロードできます。Canon Color imageCLASS MF8170c 48 ページ。 Color laser copier printer scanner fax with network
Canon Color imageCLASS MF8170c にも： インストレーション・インストラクション (1 ページ), 補足説明 (2 ページ), 取扱説明書 (8 ページ), 取扱説明書 (8 ページ), リモートUiマニュアル (40 ページ), 仕様 (2 ページ)
ページを印刷する
Specifying the Network Settings
This chapter describes the settings and procedures necessary to connect and use the
machine with a TCP/IP network.
TCP/IP Network Setup Procedures
To use a TCP/IP network, it is necessary to perform the following procedures.
Network Cable Connection (See "To Use the Machine as a Network Printer
1
(Network Connection)," in the Set-Up Instructions for Networking and
Printing.)
Connect the network cables in accordance with the Set-Up Instructions for Networking and Printing.
Preparation for Protocol Settings (See "Preparation for Protocol Settings," on
2
p. 2-3.)
Specify the machine's basic protocol settings for communication between the machine and computers using
the machine. To specify the settings, use:
•
The machine's operation panel
•
NetSpot Device Installer (Canon utility software included in the User Software CD)
•
ARP/PING commands
3
Protocol Settings (See "Protocol Settings," on p. 2-10.)
Specify the machine's advanced protocol settings. To specify the settings, use:
•
NetSpot Console (via a web browser) (Canon utility software)
•
A web browser (Remote UI)
Computer Settings for Printing (See "Setting Up a Computer for Printing," on
4
p. 2-15.)
Specify the settings for each computer you use for printing.
IMPORTANT
•
It is recommended that the network manager perform steps 1, 2, and 3 above.
TCP/IP Network Setup Procedures
2
CHAPTER
2-1