Canon Color imageCLASS MF8170c Manual de la red - Página 23

Navegue en línea o descargue pdf Manual de la red para Impresora todo en uno Canon Color imageCLASS MF8170c. Canon Color imageCLASS MF8170c 48 páginas. Color laser copier printer scanner fax with network
También para Canon Color imageCLASS MF8170c: Instrucciones de instalación (1 páginas), Instrucciones adicionales (2 páginas), Manual de instrucciones (8 páginas), Manual de instrucciones (8 páginas), Manual de Ui Remota (40 páginas), Especificación (2 páginas)

Specify the setting method for the machine IP address.

To use [Use DHCP], [Use BOOTP], and [Use RARP] for the IP address setting, select

[On].

If selecting [Off] for [Use DHCP], [Use BOOTP], and [Use RARP], the machine does

not check the protocols.

If neither DHCP, BOOTP, nor RARP can be used, the IP address specified in [IP

Address] is allocated.

IMPORTANT

For this machine, in addition to direct allocation of the IP address to the machine,

you can use DHCP, BOOTP, or RARP to specify the IP address. When the machine

is started or reset, it checks whether DHCP, BOOTP, or RARP is being used, and

then allocates the IP address using the first available setting method.

NOTE

•

Checking whether DHCP, BOOTP or RARP can be used takes about 1 to 2

minutes; it is recommended you set unused protocols to <Off>.

•

Depending on whether you use DHCP, BOOTP, or RARP to allocate the IP

address, you need to start the DHCP server, BOOTP daemon, or RARP daemon.

Specify [IP Address], [Subnet Mask], and [Gateway Address].

In [IP Address], enter the machine's IP address. In [Subnet Mask] and [Gateway

Address], enter the subnet mask and gateway address used by the TCP/IP network.

NOTE

If you are using DHCP, BOOTP, or RARP, some of the items above are not used.

The values obtained from DHCP, BOOTP, or RARP are used.

Select <Auto Detect> or <Manual Detect> for [Ethernet Driver

Settings].

If you want to specify the ethernet driver settings automatically, select <Auto Detect>.

To specify the settings manually, select <Manual Detect>.

You can specify the communication mode and ethernet type from [Communication

Type] and [Ethernet Type] when <Manual Detect> selected.

Specify the protocol settings for printing.

To use [Use Raw Print] or [Use LPD Print], select [On].

Protocol Settings

2-13