Canon Color imageCLASS MF8170c Руководство по работе с сетью - Страница 23

Просмотреть онлайн или скачать pdf Руководство по работе с сетью для Принтер "все в одном Canon Color imageCLASS MF8170c. Canon Color imageCLASS MF8170c 48 страниц. Color laser copier printer scanner fax with network
Также для Canon Color imageCLASS MF8170c: Инструкции по установке (1 страниц), Дополнительные инструкции (2 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации пульта дистанционного управления (40 страниц), Технические характеристики (2 страниц)

Specify the setting method for the machine IP address.

To use [Use DHCP], [Use BOOTP], and [Use RARP] for the IP address setting, select

[On].

If selecting [Off] for [Use DHCP], [Use BOOTP], and [Use RARP], the machine does

not check the protocols.

If neither DHCP, BOOTP, nor RARP can be used, the IP address specified in [IP

Address] is allocated.

IMPORTANT

For this machine, in addition to direct allocation of the IP address to the machine,

you can use DHCP, BOOTP, or RARP to specify the IP address. When the machine

is started or reset, it checks whether DHCP, BOOTP, or RARP is being used, and

then allocates the IP address using the first available setting method.

NOTE

•

Checking whether DHCP, BOOTP or RARP can be used takes about 1 to 2

minutes; it is recommended you set unused protocols to <Off>.

•

Depending on whether you use DHCP, BOOTP, or RARP to allocate the IP

address, you need to start the DHCP server, BOOTP daemon, or RARP daemon.

Specify [IP Address], [Subnet Mask], and [Gateway Address].

In [IP Address], enter the machine's IP address. In [Subnet Mask] and [Gateway

Address], enter the subnet mask and gateway address used by the TCP/IP network.

NOTE

If you are using DHCP, BOOTP, or RARP, some of the items above are not used.

The values obtained from DHCP, BOOTP, or RARP are used.

Select <Auto Detect> or <Manual Detect> for [Ethernet Driver

Settings].

If you want to specify the ethernet driver settings automatically, select <Auto Detect>.

To specify the settings manually, select <Manual Detect>.

You can specify the communication mode and ethernet type from [Communication

Type] and [Ethernet Type] when <Manual Detect> selected.

Specify the protocol settings for printing.

To use [Use Raw Print] or [Use LPD Print], select [On].

Protocol Settings

2-13