Amprobe ROBIN KMP7010 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba Amprobe ROBIN KMP7010. Amprobe ROBIN KMP7010 16 páginas. Ground resistance tester
Imprimir página
Check the wiring connections, if soil is too dry, or if auxiliary earth
stakes are within the specified measurement distance. When the earth
resistance is greater than the selected measuring range, LCD display will
show "OL"(overload).
4. Auto Power Off: The tester will turn itself off after 10 minutes when in
idle.
5. Back Light: Press LIGHT/LOAD to turn ON or turn OFF the backlight.
6. Hold/Save Function: While testing, press "Hold/Save" button,save data
function will be on, the displayed testing value will be saved and LCD
displays the corresponding sign. Press "Hold/Save" button again to exit
this function.
7. Storage function:
a) Storage data: Press"Hold/Save"button for about 2 seconds. Storage
function will be on and save the corresponding data. Press "Hold/
Save"button again to save the 2nd data; press"Hold/Save"button
again to save the 3rd data and so on...,Press"Hold/Save"button for
about 2 seconds to exit this function.
b) Read data: Press"Light/Load"button for about 2 seconds to read the
saved data in memory. it will show number 01 saved data. Press"Light/
Load"button again to show number 02 saved data and so on (up to
20th saved data).To return to the previous saved data, press "Hold/
Save". When "Hold/ Save"button and "Light/Load"button is working
as Up and Down selection button, pree "Light/Load" button for aout
2 seconds to exit this function.
c) Clear saved data: Press"Hold/Save"button and "Light/Load"button
simultaneously, then turn on the tester by rotating the ON/OFF dial
to any position. LCD display will show"C L .", All data in the storage
memory will be deleted.
8