DREAMVISION T9006000 Montaje y calibración - Página 8
Navegue en línea o descargue pdf Montaje y calibración para Proyector DREAMVISION T9006000. DREAMVISION T9006000 16 páginas. Theatre system kit for inti
Imprimir página2.0 L
ENS ALIGNMENT
Set the tilt and vertical position of the lens
Adjust the Anamorphic Lens tilt and vertical position, so that the projector light beam is centered into the
Anamorphic Lens. Tighten the 2 screws (B) when completed.
You may obtain a residual pincushion effect at the screen when using a throw ratio between 1.5:1 and 1.8:1
or a projection distance shorter than 5 meters. It is recommanded to install your projector at a minimum
distance of 5 meters from the screen and using 1.8:1 or higher throw ratio.
Adjust the Anamorphic Lens Focus
8
The Anamoprhic Lens features a 6-turns focus ring
R699802 - THEATER System Kit for Inti