DREAMVISION T9006000 Assembly And Calibration - Page 8

Browse online or download pdf Assembly And Calibration for Projector DREAMVISION T9006000. DREAMVISION T9006000 16 pages. Theatre system kit for inti

Print Page
2.0 L
ENS ALIGNMENT

Set the tilt and vertical position of the lens

Adjust the Anamorphic Lens tilt and vertical position, so that the projector light beam is centered into the
Anamorphic Lens. Tighten the 2 screws (B) when completed.
You may obtain a residual pincushion effect at the screen when using a throw ratio between 1.5:1 and 1.8:1
or a projection distance shorter than 5 meters. It is recommanded to install your projector at a minimum
distance of 5 meters from the screen and using 1.8:1 or higher throw ratio.

Adjust the Anamorphic Lens Focus

8
The Anamoprhic Lens features a 6-turns focus ring
R699802 - THEATER System Kit for Inti