DREAMVISION T9006000 Perakitan dan Kalibrasi - Halaman 8

Jelajahi secara online atau unduh pdf Perakitan dan Kalibrasi untuk Proyektor DREAMVISION T9006000. DREAMVISION T9006000 16 halaman. Theatre system kit for inti

Halaman Cetak

2.0 L

ENS ALIGNMENT

Set the tilt and vertical position of the lens

Adjust the Anamorphic Lens tilt and vertical position, so that the projector light beam is centered into the

Anamorphic Lens. Tighten the 2 screws (B) when completed.

You may obtain a residual pincushion effect at the screen when using a throw ratio between 1.5:1 and 1.8:1

or a projection distance shorter than 5 meters. It is recommanded to install your projector at a minimum

distance of 5 meters from the screen and using 1.8:1 or higher throw ratio.

Adjust the Anamorphic Lens Focus

The Anamoprhic Lens features a 6-turns focus ring

R699802 - THEATER System Kit for Inti